Document Actions

Citation and metadata

Back to the article.

Recommended citation

Arnold D, Mittwollen M, Schönung F, Wauer J, Barthels P (2006). Modeling and Vibration Suppression for Telescopic Systems of Structural Members with Clearance. Logistics-Journal : referierte Veröffentlichungen, Vol. 2006. (urn:nbn:de:0009-14-7213)

Download Citation

Endnote

%0 Journal Article
%T Modeling and Vibration Suppression for Telescopic Systems of Structural Members with Clearance
%A Arnold, Dieter
%A Mittwollen, Martin
%A Schönung, Frank
%A Wauer, Jörg
%A Barthels, Pierre
%J Logistics-Journal : referierte Veröffentlichungen
%D 2006
%V 2006
%N Mai
%@ 1860-7977
%F arnold2006
%X Telescopic systems of structural members with clearance are found in many applications, e.g., mobile cranes, rack feeders, fork lifters, stacker cranes (see Figure 1). Operating these machines, undesirable vibrations may reduce the performance and increase safety problems. Therefore, this contribution has the aim to reduce these harmful vibrations. For a better understanding, the dynamic behaviour of these constructions is analysed. The main interest is the overlapping area of each two sections of the above described systems (see markings in Figure 1) which is investigated by measurements and by computations. A test rig is constructed to determine the dynamic behaviour by measuring fundamental vibrations and higher frequent oscillations, damping coefficients, special appearances and more. For an appropriate physical model, the governing boundary value problem is derived by applying Hamilton’s principle and a classical discretisation procedure is used to generate a coupled system of nonlinear ordinary differential equations as the corresponding truncated mathematical model. On the basis of this model, a controller concept for preventing harmful vibrations is developed.
%L 620
%K Intralogistics
%K Intralogistik
%K Logistics
%K Logistik
%K Material flow
%K Materialfluss
%K intra logistics
%K technische Logistik
%R 10.2195/LJ_Ref_Arnold_E_0320061
%U http://nbn-resolving.de/urn:nbn:de:0009-14-7213
%U http://dx.doi.org/10.2195/LJ_Ref_Arnold_E_0320061
Download

Bibtex

@Article{arnold2006,
  author = 	"Arnold, Dieter
		and Mittwollen, Martin
		and Sch{\"o}nung, Frank
		and Wauer, J{\"o}rg
		and Barthels, Pierre",
  title = 	"Modeling and Vibration Suppression for Telescopic Systems of Structural Members with Clearance",
  journal = 	"Logistics-Journal : referierte Ver{\"o}ffentlichungen",
  year = 	"2006",
  volume = 	"2006",
  number = 	"Mai",
  keywords = 	"Intralogistics; Intralogistik; Logistics; Logistik; Material flow; Materialfluss; intra logistics; technische Logistik",
  abstract = 	"Telescopic systems of structural members with clearance are found in many applications, e.g., mobile cranes, rack feeders, fork lifters, stacker cranes (see Figure 1). Operating these machines, undesirable vibrations may reduce the performance and increase safety problems. Therefore, this contribution has the aim to reduce these harmful vibrations. For a better understanding, the dynamic behaviour of these constructions is analysed. The main interest is the overlapping area of each two sections of the above described systems (see markings in Figure 1) which is investigated by measurements and by computations. A test rig is constructed to determine the dynamic behaviour by measuring fundamental vibrations and higher frequent oscillations, damping coefficients, special appearances and more. For an appropriate physical model, the governing boundary value problem is derived by applying Hamilton's principle and a classical discretisation procedure is used to generate a coupled system of nonlinear ordinary differential equations as the corresponding truncated mathematical model. On the basis of this model, a controller concept for preventing harmful vibrations is developed.",
  issn = 	"1860-7977",
  doi = 	"10.2195/LJ_Ref_Arnold_E_0320061",
  url = 	"http://nbn-resolving.de/urn:nbn:de:0009-14-7213"
}
Download

RIS

TY  - JOUR
AU  - Arnold, Dieter
AU  - Mittwollen, Martin
AU  - Schönung, Frank
AU  - Wauer, Jörg
AU  - Barthels, Pierre
PY  - 2006
DA  - 2006//
TI  - Modeling and Vibration Suppression for Telescopic Systems of Structural Members with Clearance
JO  - Logistics-Journal : referierte Veröffentlichungen
VL  - 2006
IS  - Mai
KW  - Intralogistics
KW  - Intralogistik
KW  - Logistics
KW  - Logistik
KW  - Material flow
KW  - Materialfluss
KW  - intra logistics
KW  - technische Logistik
AB  - Telescopic systems of structural members with clearance are found in many applications, e.g., mobile cranes, rack feeders, fork lifters, stacker cranes (see Figure 1). Operating these machines, undesirable vibrations may reduce the performance and increase safety problems. Therefore, this contribution has the aim to reduce these harmful vibrations. For a better understanding, the dynamic behaviour of these constructions is analysed. The main interest is the overlapping area of each two sections of the above described systems (see markings in Figure 1) which is investigated by measurements and by computations. A test rig is constructed to determine the dynamic behaviour by measuring fundamental vibrations and higher frequent oscillations, damping coefficients, special appearances and more. For an appropriate physical model, the governing boundary value problem is derived by applying Hamilton’s principle and a classical discretisation procedure is used to generate a coupled system of nonlinear ordinary differential equations as the corresponding truncated mathematical model. On the basis of this model, a controller concept for preventing harmful vibrations is developed.
SN  - 1860-7977
UR  - http://nbn-resolving.de/urn:nbn:de:0009-14-7213
DO  - 10.2195/LJ_Ref_Arnold_E_0320061
ID  - arnold2006
ER  -
Download

Wordbib

<?xml version="1.0" encoding="UTF-8"?>
<b:Sources SelectedStyle="" xmlns:b="http://schemas.openxmlformats.org/officeDocument/2006/bibliography"  xmlns="http://schemas.openxmlformats.org/officeDocument/2006/bibliography" >
<b:Source>
<b:Tag>arnold2006</b:Tag>
<b:SourceType>ArticleInAPeriodical</b:SourceType>
<b:Year>2006</b:Year>
<b:PeriodicalTitle>Logistics-Journal : referierte Veröffentlichungen</b:PeriodicalTitle>
<b:Volume>2006</b:Volume>
<b:Issue>Mai</b:Issue>
<b:Url>http://nbn-resolving.de/urn:nbn:de:0009-14-7213</b:Url>
<b:Url>http://dx.doi.org/10.2195/LJ_Ref_Arnold_E_0320061</b:Url>
<b:Author>
<b:Author><b:NameList>
<b:Person><b:Last>Arnold</b:Last><b:First>Dieter</b:First></b:Person>
<b:Person><b:Last>Mittwollen</b:Last><b:First>Martin</b:First></b:Person>
<b:Person><b:Last>Schönung</b:Last><b:First>Frank</b:First></b:Person>
<b:Person><b:Last>Wauer</b:Last><b:First>Jörg</b:First></b:Person>
<b:Person><b:Last>Barthels</b:Last><b:First>Pierre</b:First></b:Person>
</b:NameList></b:Author>
</b:Author>
<b:Title>Modeling and Vibration Suppression for Telescopic Systems of Structural Members with Clearance</b:Title>
<b:Comments>Telescopic systems of structural members with clearance are found in many applications, e.g., mobile cranes, rack feeders, fork lifters, stacker cranes (see Figure 1). Operating these machines, undesirable vibrations may reduce the performance and increase safety problems. Therefore, this contribution has the aim to reduce these harmful vibrations. For a better understanding, the dynamic behaviour of these constructions is analysed. The main interest is the overlapping area of each two sections of the above described systems (see markings in Figure 1) which is investigated by measurements and by computations. A test rig is constructed to determine the dynamic behaviour by measuring fundamental vibrations and higher frequent oscillations, damping coefficients, special appearances and more. For an appropriate physical model, the governing boundary value problem is derived by applying Hamilton’s principle and a classical discretisation procedure is used to generate a coupled system of nonlinear ordinary differential equations as the corresponding truncated mathematical model. On the basis of this model, a controller concept for preventing harmful vibrations is developed.</b:Comments>
</b:Source>
</b:Sources>
Download

ISI

PT Journal
AU Arnold, D
   Mittwollen, M
   Schönung, F
   Wauer, J
   Barthels, P
TI Modeling and Vibration Suppression for Telescopic Systems of Structural Members with Clearance
SO Logistics-Journal : referierte Veröffentlichungen
PY 2006
VL 2006
IS Mai
DI 10.2195/LJ_Ref_Arnold_E_0320061
DE Intralogistics; Intralogistik; Logistics; Logistik; Material flow; Materialfluss; intra logistics; technische Logistik
AB Telescopic systems of structural members with clearance are found in many applications, e.g., mobile cranes, rack feeders, fork lifters, stacker cranes (see Figure 1). Operating these machines, undesirable vibrations may reduce the performance and increase safety problems. Therefore, this contribution has the aim to reduce these harmful vibrations. For a better understanding, the dynamic behaviour of these constructions is analysed. The main interest is the overlapping area of each two sections of the above described systems (see markings in Figure 1) which is investigated by measurements and by computations. A test rig is constructed to determine the dynamic behaviour by measuring fundamental vibrations and higher frequent oscillations, damping coefficients, special appearances and more. For an appropriate physical model, the governing boundary value problem is derived by applying Hamilton’s principle and a classical discretisation procedure is used to generate a coupled system of nonlinear ordinary differential equations as the corresponding truncated mathematical model. On the basis of this model, a controller concept for preventing harmful vibrations is developed.
ER
Download

Mods

<mods>
  <titleInfo>
    <title>Modeling and Vibration Suppression for Telescopic Systems of Structural Members with Clearance</title>
  </titleInfo>
  <name type="personal">
    <namePart type="family">Arnold</namePart>
    <namePart type="given">Dieter</namePart>
  </name>
  <name type="personal">
    <namePart type="family">Mittwollen</namePart>
    <namePart type="given">Martin</namePart>
  </name>
  <name type="personal">
    <namePart type="family">Schönung</namePart>
    <namePart type="given">Frank</namePart>
  </name>
  <name type="personal">
    <namePart type="family">Wauer</namePart>
    <namePart type="given">Jörg</namePart>
  </name>
  <name type="personal">
    <namePart type="family">Barthels</namePart>
    <namePart type="given">Pierre</namePart>
  </name>
  <abstract>Telescopic systems of structural members with clearance are found in many applications, e.g., mobile cranes, rack feeders, fork lifters, stacker cranes (see Figure 1). Operating these machines, undesirable vibrations may reduce the performance and increase safety problems. Therefore, this contribution has the aim to reduce these harmful vibrations. For a better understanding, the dynamic behaviour of these constructions is analysed. The main interest is the overlapping area of each two sections of the above described systems (see markings in Figure 1) which is investigated by measurements and by computations. A test rig is constructed to determine the dynamic behaviour by measuring fundamental vibrations and higher frequent oscillations, damping coefficients, special appearances and more. For an appropriate physical model, the governing boundary value problem is derived by applying Hamilton’s principle and a classical discretisation procedure is used to generate a coupled system of nonlinear ordinary differential equations as the corresponding truncated mathematical model. On the basis of this model, a controller concept for preventing harmful vibrations is developed.</abstract>
  <subject>
    <topic>Intralogistics</topic>
    <topic>Intralogistik</topic>
    <topic>Logistics</topic>
    <topic>Logistik</topic>
    <topic>Material flow</topic>
    <topic>Materialfluss</topic>
    <topic>intra logistics</topic>
    <topic>technische Logistik</topic>
  </subject>
  <classification authority="ddc">620</classification>
  <relatedItem type="host">
    <genre authority="marcgt">periodical</genre>
    <genre>academic journal</genre>
    <titleInfo>
      <title>Logistics-Journal : referierte Veröffentlichungen</title>
    </titleInfo>
    <part>
      <detail type="volume">
        <number>2006</number>
      </detail>
      <detail type="issue">
        <number>Mai</number>
      </detail>
      <date>2006</date>
    </part>
  </relatedItem>
  <identifier type="issn">1860-7977</identifier>
  <identifier type="urn">urn:nbn:de:0009-14-7213</identifier>
  <identifier type="doi">10.2195/LJ_Ref_Arnold_E_0320061</identifier>
  <identifier type="uri">http://nbn-resolving.de/urn:nbn:de:0009-14-7213</identifier>
  <identifier type="citekey">arnold2006</identifier>
</mods>
Download

Full Metadata

Bibliographic Citation Logistics Journal : referierte Veröffentlichungen, Vol. 2006, Iss. Mai
Title

Modeling and Vibration Suppression for Telescopic Systems of Structural Members with Clearance (eng)
Author Dieter Arnold, Martin Mittwollen, Frank Schönung, Jörg Wauer, Pierre Barthels
Language eng
Abstract Telescopic systems of structural members with clearance are found in many applications, e.g., mobile cranes, rack feeders, fork lifters, stacker cranes (see Figure 1). Operating these machines, undesirable vibrations may reduce the performance and increase safety problems. Therefore, this contribution has the aim to reduce these harmful vibrations. For a better understanding, the dynamic behaviour of these constructions is analysed. The main interest is the overlapping area of each two sections of the above described systems (see markings in Figure 1) which is investigated by measurements and by computations. A test rig is constructed to determine the dynamic behaviour by measuring fundamental vibrations and higher frequent oscillations, damping coefficients, special appearances and more. For an appropriate physical model, the governing boundary value problem is derived by applying Hamilton’s principle and a classical discretisation procedure is used to generate a coupled system of nonlinear ordinary differential equations as the corresponding truncated mathematical model. On the basis of this model, a controller concept for preventing harmful vibrations is developed.
Subject Intralogistics, Intralogistik, Logistics, Logistik, Material flow, Materialfluss, intra logistics, technische Logistik
DDC 620
Rights DPPL
URN: urn:nbn:de:0009-14-7213
DOI https://doi.org/10.2195/LJ_Ref_Arnold_E_0320061